Subscribe to newsletter

*Mandatory fields

Impressum

APLICACIONES MECÁNICAS DEL CAUCHO, S.A.
S.A. bedeutet Aktiengesellschaft - AG (Format Spanien)
Über APLICACIONES MECÁNICAS DEL CAUCHO Deutschland

Geschäftsführer: Jon Ander Lopetegui Galarraga.
Adresse: Industrialdea zona A - parc. 35, 20159 Asteasu, Gipuzkoa, Spanien.
Handelsregisternummer: A-20101150
USt.-Id-Nr: ESA20101150

Für Anfragen an den Kundenservice: info@mecanocaucho.com

Applications

Vibration Isolator Pro

The integrated accelerometers of your phone are capable of making an FFT measurement where you will be able to see what are the main frequencies that you need to isolate.

STEPS TO SELECT THE CORRECT VIBRATION ISOLATOR

  1. 1. PLACE THE PHONE ON THE VIBRATING ELEMENT: Click on the "START" button the mobile phone will measure the predominant vibration frequencies.
  2. 2. SELECT THE FREQUENCY THAT YOU WANT TO ISOLATE: We will select the main peak. If excellent results are requested, we will select the lowest frequency. Attention, this may lead us to soft mounts.
  3. 3. INTRODUCE THE TECHNICAL DATA OF THE APPLICATION: Information such as total weight, Number of vibration isolators and isolation level will be required. Example: 70% good. 85% very good. 95% Excellent.
  4. 4. SELECTION: According to the technical parameters of your application, several options will be shown to you. The online access to technical datasheets will give you a deep understanding of the mount that you are interested in.

www.vibrationisolatorpro.com



Acoustic Hanger Pro

Inserting the basic elements of your application the app allows you to select the correct solution according to your Budget or natural frequency requirement. The app will ask you basic technical information such as weight per sqm, distance between hangers/mounts and required natural frequency. Once this data is inserted the app will provide you a calculation, datasheets and videos of installation procedure.

STEPS TO SELECT THE CORRECT ACOUSTIC HANGER OR FLOOR MOUNT.

  • 1. Indicate if you want to isolate a floor or a ceiling. Then introduce the weight per square meter and distance between hangers/mounts
  • 2. Introduce the natural frequency that you require. If you ignore this value you can select if your preference is high isolation or cost effectiveness. You can also select if the elastic material is rubber, Sylomer or spring.
  • 3. In case that you want to isolate a ceiling, you must indicate if the hanger has to be anchored to the slab, to the metallic beam or between rods. This will provide you a range of selected hangers and mounts that will fulfil your requirement.
  • 4. Select the hanger that suits best. This will lead you to a page where you will be able to check the isolation level. On this page you will be able to receive the complete information by email or even require a quotation/offer.


www.acoustichangerpro.com