The AMC-MECANOCAUCHO® type AN-60 anti vibration mounts are ideal for compression or traction axial loads. Depending on the amount of AN-60 stacked anti vibration mounts, the stiffness of the system can be tuned to suit the application.
The AMC-MECANOCAUCHO® type AN-60 anti vibration mounts have an specific design that allows suspensions with tuneable traction and compression stiffness rates. This feature is particularly useful on those applications where vibration and transient forces are coming primarily on the axial direction. The metal parts are robust and designed with an specific grove that allows supplementary AN-60 to be stacked.
Metal parts treated with Zinck Nickel coating. This feature allows them to have high protection to salt spray test chamber.
TECHNICAL CHARACTERISTICS
Depending on the amount of AN-60 stacked anti vibration mounts, the stiffness of the system can be tuned to suit the application.
Units
Static Axial Stiffness (K, at 4200N)
1
5615 N/mm
2
2934 N/mm
3
1985 N/mm
4
1489 N/mm
The AMC-MECANOCAUCHO® type AN-60 anti vibration mounts have a double bonded design to withstand to high dynamic forces.
APPLICATIONS
The AMC-MECANOCAUCHO® type AN-60 anti vibration mounts can suit applications of different nature, from suspension of vibratory equipment to Tune mass dampers.
The AMC-MECANOCAUCHO® type AN-60 anti vibration mounts can also be used on mobile applications that are exposed to compression and traction forces, for example, mounting on board equipment in ships, rail, road transport such as engines, pumps, generator sets.
United Kingdom
