AMC-MECANOCAUCHO® INTRODUCES THE NEW VIBRABSORBER 10 AMC ANTISEISMIC SPRING VIBRATION ISOLATOR THAT ACHIEVES NATURAL FREQUENCIES BELOW 5 HZ

The AMC-MECANOCAUCHO® type 10 AMC antiseismic mounts are ideal for stationary applications where high isolation degree is required to low disturbing frequencies (800 to 1500 rpm).

TECHNICAL CHARACTERISTICS

The design of these vibration isolators is composed of interlocking metal parts where a rubber buffer is placed in order to avoid metal to metal contact when high shear loads occur. This feature allows to provide lateral stability to the suspended element. These lateral metal parts have been calculated to withstand to lateral high forces that may occur in seismic events, allowing the vibration isolator to resist without rupture. These mounts can be supplied with a Sylomer layer under the below metal part. This feature allows to filter high frequency vibrations that could go through the coil springs, providing to the 10 AMC Antiseismic vibration isolator higher degree of vibration isolation.

The AMC-MECANOCAUCHO 10 AMC antiseismic vibration isolators are manufactured in several types of springs to suit load from 300 to 8000Kg load per mount.

The metal parts are epoxy coated in order to withstand to arduous corrosive environments.

APPLICATIONS

The AMC-MECANOCAUCHO® 10 AMC antiseismic mounts are used on stationary applications where disturbing frequency is low and a high vibration isolation and lateral stability is required, for example generator sets, HVAC equipment, pumps or ventilators.