AMC-MECANOCAUCHO® INTRODUCES THE NEW ST+Sylomer® ACOUSTIC HANGER
The AMC-MECANOCAUCHO® type ST+Sylomer® is ideal for high performance building acoustics as well as for stationary applications where the acoustic hanger must provide a high degree of structure borne noise isolation. Thanks to their low stiffness they are capable of achieving natural frequencies ranging from 3 to 4Hz. Due to this fact they are often used on applications where a high isolation degree is required even at low disturbing frequencies (600 to 1000 rpm).
TECHNICAL CHARACTERISTICS
The design of these acoustic hangers is composed of:
- 1. Metal parts that are mechanically failsafe.
- 2. A rubber moulded part equipped with an end stroke buffer if ever the acoustic hanger is overloaded.
- 3. A prime degree steel coil spring to provide low natural frequency to the acoustic hanger.
- 4. A Sylomer® layer to isolate mid-high frequencies that could travel through the coil spring.
 |  |
| WITHOUT DEFLECTION | 14mm DEFLECTION |
These mounts are equipped with different types of coil springs to suit different loading applications from 5 to 60 Kg per hanger.
Contact our team of acoustic hanger specialists to provide you advice and recommendations of installation.
