AMC-MECANOCAUCHO® INTRODUCES THE NEW ST-5 and ST-5+Sylomer ® ACOUSTIC HANGERS. THE PERFECT VIBRATION ISOLATOR FOR THE VIBRATION ISOLATION OF LOUD SPEAKERS

The AMC-MECANOCAUCHO® type ST-5 and ST-5+Sylomer® are also ideal for high performance building acoustics as well for stationary applications where the acoustic hanger must provide a high degree of structure borne noise isolation. Thanks to their low stiffness they are capable of achieve natural frequencies ranging from 3 to 4Hz. Due to this fact they are often used on applications where a high isolation degree is required even at low disturbing frequencies (600 to 1000 rpm).

TECHNICAL CHARACTERISTICS

The design of these acoustic hangers is composed of:

• 1.- Metal parts that are mechanically failsafe.
• 2.- A rubber molded part equipped with an end stroke buffer if ever the acoustic hanger is overloaded.
• 3.- A prime degree steel coil spring to provide low natural frequency to the acoustic hanger.
• 4.- A Sylomer® layer to isolate mid-high frequencies that could travel through the coil spring.

Contact our team of acoustic hanger specialists to provide you advice and recommendations of installation.