AMC-MECANOCAUCHO® INTRODUCES THE NEW VIBRABSORBER VSH ANTISEISMIC SPRING VIBRATION ISOLATOR THAT ACHIEVES NATURAL FREQUENCIES UP TO 2 Hz

The AMC-MECANOCAUCHO® type VSH antiseismic mounts are ideal for stationary applications where high isolation degree is required to low disturbing frequencies (600 to 1000 rpm). Its specific design allows these vibration isolators provide greater deflection compared to AMC-MECANOCAUCHO standard antiseismic spring mounts.

TECHNICAL CHARACTERISTICS

The design of these vibration isolators is composed of interlocking metal parts where a rubber buffer is placed in order to avoid metal to metal contact when high shear loads occur. This feature allows to provide lateral stability to the suspended element. These lateral metal parts have been calculated to withstand to lateral high forces that may occur in seismic events, allowing the vibration isolator to resist without rupture. These mounts can be supplied with a Sylomer layer under the below metal part. This feature allows to filter high frequency vibrations that could go through the coil springs, providing to the VSH Antiseismic vibration isolator higher degree of vibration isolation.

The AMC-MECANOCAUCHO VSH antiseismic vibration isolators are manufactured in several types of springs to suit load from 50 to 4000Kg load per mount.

The metal parts are epoxy coated in order to withstand to arduous corrosive environments.

APPLICATIONS

The AMC-MECANOCAUCHO® VSH antiseismic mounts are used on stationary applications where disturbing frequency is low and a high vibration isolation and lateral stability is required, for example generator sets, HVAC equipment, pumps or ventilators.