Stainless Steel Stud Mounts Type A

Rubber-metal vibration isolators with male stainless steel studs, designed for vibration isolation in corrosive and demanding environments.

The AMC-MECANOCAUCHO® Stainless Steel Stud Mounts Type A are compact rubber-metal vibration isolators designed to reduce the transmission of vibration and structure-borne noise between equipment and its supporting structure.

They consist of a cylindrical elastomer body bonded between two stainless steel metal plates fitted with male threaded studs. This simple and robust design provides an elastic connection while allowing easy installation on a wide range of equipment.

Depending on the installation, the elastomer can work in compression, shear, or a combination of both, allowing the elastic behavior of the isolator to be adapted to the requirements of the application.

The use of stainless steel metal components provides excellent corrosion resistance, making these vibration isolators particularly suitable for marine environments, food-processing equipment, outdoor installations, and industrial applications exposed to moisture or corrosive atmospheres.

BOBBINS TYPE A STAINLESS STEEL

Type	Code	A(in)	B(in)	C(in)	H(in)	Weight(lbs)	COMPRESSIONMax. Load (daN)	COMPRESSION Deflection (in)	SHEAR Max. Load (daN)	SHEAR Deflection (in)
BOBBINS TYPE A STAINLESS STEEL	120301	0.79	0.79	M-6	0.71	0.05	30	0.18	5	0.12
	120302	0.79	0.98	M-6	0.71	0.05	30	0.2	4,5	0.14
	120303	0.98	0.98	M-6	0.71	0.07	55	0.24	8	0.16
	120304	0.98	1.18	M-6	0.71	0.08	50	0.31	8	0.22
	120305	1.18	0.79	M-8	0.91	0.11	80	0.2	11	0.16
	120306	1.18	1.18	M-8	0.91	0.13	70	0.28	11	0.22
	120307	1.57	1.18	M-8	0.91	0.19	150	0.24	30	0.2
	120308	1.57	1.57	M-10	1.1	0.26	120	0.35	20	0.28
	120309	1.97	0.98	M-10	1.1	0.29	300	0.24	25	0.2
	120310	1.97	1.38	M-10	1.1	0.34	250	0.31	25	0.26
	120311	1.97	1.77	M-10	1.1	0.4	190	0.37	25	0.3
	120312	2.36	1.38	M-10	1.1	0.49	300	0.24	30	0.22
	120313	2.36	1.77	M-10	1.1	1	250	0.3	30	0.28
	120314	2.36	2.36	M-10	1.1	1	200	0.31	30	0.28
	120315	2.76	1.77	M-12	1.46	1	350	0.31	35	0.28

Technical characteristics

Depending on the size of the rubber block, the AMC Mecanocaucho® bobbing has more or less elasticity, which is greater particularly in all directions perpendicular to its axis (shear). The AMC Mecanocaucho® bobbing thus makes it possible to make joins which permit major relative movements, up to several millimetres (in the case of heat expansion, chassis deformations, etc.). The AMC Mecanocaucho® bobbing serves very well for the vibration isolation of machines where the vibrations are perpendicular to their axis, unless these stresses are too much when applied in this direction.

Operation and Assembly

Its elasticity is much greater in all the directions parallel to the armatures than in the perpendicular direction. The rubber works based on compression or shear depending on the direction it is placed at installation time. This direction is made according to the use and the objective. It is therefore installed with nuts or screws depending on the model chosen, with one part attached to the fixed chassis and the other to the machine to be suspended.

Applications

Compressor Vibration Isolation in Public Transit Vehicles

More details

Advantages

01

Easy installation

This mount requires no major modifications to the structure for installation.

02

Superior corrosion protection

The metal parts of this anti-vibration mount are made of stainless steel to prevent corrosion in the most demanding environments.

Downloads

Technical Data Sheet