VIBRATION ISOLATOR PRO ACCELEROMETER: THE SENSOR FOR THE VIBRATION ISOLATOR PRO APP THAT ALLOWS YOU TO FIND THE CORRECT ANTI VIBRATION MOUNT.

The integrated accelerometers of your phone allow you to make an FFT (Fast Fourier Transform) measurement, but they are limited up to 50hz frequency range. This new device developed by AMC-Mecanocaucho, allows you to make vibration measurements up to 250Hz and have a direct connection with the AMC-Mecanocaucho engineering team, which will provide you technical assistance if you need anything else regarding the measurements steps, or if you have any question regarding the selection of the correct anti vibration mount.

STEPS TO MAKE A VIBRATION MEASUREMENT WITH THE VIBRATION ISOLATOR PRO EXTERNAL ACCELEROMETER.

The application will guide the user along several steps in order to complete the analysis in an easy way.

1. Connect the accelerometer to your mobile phone, Android or iOS.
2. Fulfil the general data of the measurement like the type of machine, number of supports and take a photo of it.
3. Make two measurements in each support, one before the anti vibration mount and other after it.
4. The application will provide you the FFT graph of the vibration measurement, vibration rms values in X, Y and Z axis and the current isolation level.
5. A complete report of the measurement will be sent to your email.
6. If you already know the main disturbing frequency, you can skip the analysis and fulfil the data regarding the weight of the machine and the desired isolation level to get a proposal about different anti vibration mounts for your application.

Vibration Isolator Pro step by step.

step 1: Press start.

step 1: Press start. step 2: Select your measurement type. step 3: Selectthe number of mount. step 4: Take a photo of each measurement point. step 5: See results of each measurement point step 6: Precise results will be shown.

*In order to adapt its products to the state of the art, AMC, S.A. reserves the right to modify the conception and manufacture of the materials presented in this pague without prior notice.

ADVANTAGES:

1. Compact design
2. 3 axis accelerometers
3. DC to 250Hz useful bandwidth
4. Low noise
5. IOS and Android compatible
6. Direct connection with AMC-Mecanocaucho technical department
7. Quick and easy selection of the correct anti vibration mount for your application.

For more information please do not hesitate to contact our application technicians . They will answer any questions you may have.