SCBR Vibration Isolator
Compact vibration isolator with expandable elastomer lip and metal reinforcement, designed for direct and durable installation in the frame and improved protection against elastomer fatigue.
The AMC-MECANOCAUCHO® SCBR vibration isolators are compact elastic elements designed to be installed directly into a hole in the frame, providing a simple, reliable, and cost-effective vibration isolation connection.
During tightening, the lower rubber lip deforms and expands, securing the isolator within the frame and creating a multidirectional elastic connection capable of absorbing vibration and shock.
The SCBR version incorporates metal reinforcement around the neck, protecting the elastomer against friction with the mounting hole. This design reduces the risk of premature elastomer fatigue and improves the durability of the isolator in applications subjected to vibration, shock, and repeated dynamic loads.
Its compact design and quick installation make the SCBR particularly suitable for mobile machinery, industrial vehicles, cabs, enclosures, and auxiliary equipment.
The SCBR mounts must be installed according to the following installation instructions:
- They can be installed in frames of different thicknesses according to the values of T, given in the table below. The load vs. deformation curves will vary depending on the thickness of the frame on which the mount is installed. This thickness "T" determines the degree of precompression of the mount.
- For the correct installation of the mount, it is recommended to make a hole in the frame with diameter Q, given in the table below.
- The use of washers is recommended in the event that the support surface does not completely cover the rubber surface.
- Respect the tightening torque of the mount.
- In case of any doubt, contact the technical department.
