Machinery vibration isolation with vibrabsorber + Sylomer®

Low-frequency vibration isolation for industrial machinery

Machinery isolation with Vibrabsorber+ Sylomer® reduces the transmission of low-frequency vibrations from machinery to the building structure. The combination of steel springs and Sylomer® provides excellent vibration isolation while adding damping to control resonance, improving acoustic comfort and protecting the building from structure-borne vibration.
machinery-isolation-spring-sylomer-big
Solutions
Vibration Isolation with Vibrabsorber + Sylomer spring mounts:

  1. Machinery: Technical equipment that generates vibrations during operation and must be isolated to prevent their transmission to the building structure.

  2. Vibrabsorber+Sylomer spring mount: The 2V-SH spring isolator combines a steel spring with Sylomer® damping material to provide low-frequency vibration isolation. It decouples the machinery from the structure, reducing the transmission of structure-borne vibrations.

  3. Building structure: Supporting structure where rigid transmission paths for noise and vibrations must be avoided.

solution-machinery-spring-sylomer
Advice

VIBRATION ISOLATION OF INDUSTRIAL MACHINERY. MOTION CONTROL USING INERTIA MASS SYSTEMS OR OPTIMIZED VIBRATION ISOLATORS

Vibration isolation and stability, two opposed concepts that can find a harmony through correct positioning of mounts.
More details
Isolated Vee twin Compressor with AMC-MECANOCAUCHO vibration isolators.
Advice

TIP: Akustikabsorber® & Vibrabsorber®+Sylomer good practices to achieve noise and vibration isolation whilst maintaining correct engine cooling performance.

Akustikabsorber® noise attenuating composites are often installed in industrial machinery to absorb, insulate and damp airborne noise.
More details
Akustikabsorber® & Vibrabsorber®+Sylomer.
Machinery noise insulation

VIBRATION ISOLATION OF MACHINERY IN FACTORIES

Methods for isolating industrial vibration and noise.

More details
Vibration isolation of machinery in factories
Catalogues

NEW BROCHURE OF SOLUTIONS FOR MACHINERY ISOLATION IN FACTORIES

AMC Mecanocaucho presents its new brochure specialized in industrial machinery isolation.

More details
New brochure Industry
Advice

TIP: Enclosure of machines. Use of Akustikabsorber and Vibrabsorber+Sylomer® products. Reduction noise level according the isolation technique.

This article aims to inform people of the expected typical improvements in noise reduction per frequency band of industrial machinery.
More details
Akustikabsorber® & Vibrabsorber®+Sylomer.
Advice

CORRECT INSTALLATION OF SPRING HANGERS TO OPTIMIZE ACOUSTIC INSULATION RESULTS.

Correct installation of these anti vibration mounts will optimize soundproofing results
More details
VT spring hanger from AMC-MECANOCAUCHO.

Vibration isolators for this solution

2V-SR Spring Isolator

2V-SR Spring Isolator

2V-SR high-capacity spring isolator with up to 1.2 in (30 mm) static deflection, natural frequency as low as 4 Hz and Sylomer® base for broadband vibration isolation.
3V-SR Spring Isolator

3V-SR Spring Isolator

3V-SR high-capacity spring isolator with up to 1.2 in (30 mm) static deflection, natural frequency as low as 4 Hz and Sylomer® base for broadband vibration isolation.
4V-SR Spring Isolator

4V-SR Spring Isolator

4V-SR high-capacity spring isolator with up to 1.2 in (30 mm) static deflection, natural frequency as low as 4 Hz and Sylomer® base for broadband vibration isolation.
2V-SH Spring Isolator

2V-SH Spring Isolator

2V-SH high-deflection spring isolator with up to 2 inches (50 mm) static deflection, providing very low-frequency vibration isolation with natural frequencies as low as 3 Hz.
3V-SH Spring Isolator

3V-SH Spring Isolator

3V-SH high-deflection spring isolator with up to 2 inches (50 mm) static deflection, providing very low-frequency vibration isolation with natural frequencies as low as 3 Hz.
4V-SH Spring Isolator

4V-SH Spring Isolator

4V-SH high-deflection spring isolator with up to 2 inches (50 mm) static deflection, providing very low-frequency vibration isolation with natural frequencies as low as 3 Hz.
Alt imagen

4V-SR Anti-Seismic Spring Isolator

Four-spring anti-seismic isolator for high loads, with leveling system, integrated seismic restraint, and Sylomer® for vibration isolation over a wide frequency range.
Alt imagen

4V-SH Anti-Seismic Spring Isolator

Four-spring anti-seismic spring isolator with static deflection up to 50 mm (2 inches), natural frequency as low as 3 Hz, Sylomer® and integrated seismic restraint.
Alt imagen

FZH Spring + Sylomer® – Spring Jack-Up Mounts for Floating Slabs

FZH Spring + Sylomer® spring jack-up mounts for floating slabs, with a natural frequency down to 4 Hz for high-performance low-frequency vibration and structure-borne noise isolation.

We can help you

We have a team of engineers ready to assist you with your specific needs.
Contact us
descripcion