MD Vibration Isolators
High-damping vibration isolators designed to combine vibration isolation, stability and motion control.
The AMC-MECANOCAUCHO® MD vibration isolators have a similar design to the BSB and BRB ranges. Their main distinguishing feature is the use of a high internal damping synthetic elastomer compound.
This formulation helps dissipate vibrational energy and reduce motion amplitudes, particularly during transient conditions and when passing through resonance frequencies. MD vibration isolators therefore provide an excellent balance of vibration isolation, damping and equipment stability.
Thanks to their ability to control oscillations, they are particularly well suited for engines, generator sets, pumps, compressors, and mobile or stationary machinery subjected to dynamic loads and requiring a stable, highly damped suspension.
Technical characteristics
The top metal cap protects the rubber section from possible deisel , oil splashes.
It has an electrolytic coating that protects the metal parts against corrosion.
The mounts have an interlocking metal component that provides fail-safe protection for mobile applications. This device limits vertical movement when the mounts are subjected to shock loads in transit .
The hood mounts should be be installed between two parallel and perfectly flat surfaces. Mounts operating tilted or twisted do not work properly. This may be due to incorrect alignment, tolerances in the building of the chassis or over-tightened torque during the installation of the Antivibration mounts.
This applies to our marine-type, BSB, BRB or Mecanodamp mounts.
You might also be interested in
