Akustik Saw

Acoustic hanger for saw-tooth ceiling profiles. Fast, secure, tool-free installation. Load range: 8–60 kg.

The Akustik Saw range is designed for the suspension of acoustic ceilings and machinery operating above 1,000 rpm. Every model incorporates the same high-performance elastomer element, specifically engineered to provide effective vibration isolation and long-term mechanical reliability.

The steel housing is designed to support loads of up to 650 kg and is protected with a corrosion-resistant zinc-plated finish. Its tool-free fixing system enables fast, secure installation on Saw ceiling profiles.

Alt imagen
Akustik Saw A-45
Akustik Saw B-60
 TypeSUMMARYMax. Load(kg)CodeWeight(kg)BIMCEUKCA
alt imagenAkustik Saw A-45Fitted directly to ceiling using two holes.8-30238610.132
 TypeSUMMARYMax. Load(kg)CodeWeight(kg)BIMCEUKCA
alt imagenAkustik Saw B-60Fitted directly to ceiling using two holes.25-60238620.132
Elastic properties
Advantages
01
Easy Installation
This mount requires minimal structural modifications, making installation quick and straightforward.
02
Secure ceiling anchorage
With more than one fixing point to the overhead slab, it is particularly reliable for anchorages with low load-bearing capacity.
Downloads
Technical Data Sheet
PDF
Download

You might also be interested in

Alt imagen

Akustik 1

Acoustic hanger for suspended ceilings, pipelines, and machinery.

Alt imagen

Akustik 3

Acoustic hanger with through-hole fixing for suspended ceilings, piping, and machinery.
Alt imagen

Akustik GB

An acoustic hanger for when a lateral fixation is required

Springtec Type 1

Springtec Type 1

Spring hanger for low-frequency vibration isolation. Load range: 5–60 kg.
Springtec Type 2

Springtec Type 2

An acoustic spring hanger. Load range 5-60kg

VT Spring Hanger

VT Spring Hanger

Low-frequency spring hanger. Load range: 8–750 kg. Up to 30 mm deflection.
VT-HD Anti-Vibration Spring Hanger

VT-HD Anti-Vibration Spring Hanger

VT-HD anti-vibration spring hanger for high loads, with up to 50 mm (2 inches) deflection and natural frequencies down to 3 Hz.
Alt imagen

Grand Akustik

High-load acoustic hanger for suspended ceilings and machinery
Alt imagen

Spring Rubber

Hybrid spring and elastomer hanger for low-frequency vibration isolation. Load range: 25–150 kg.

Akustik accessories

Akustik accessories

Accessories for different fixing and installation methods.
Alt imagen

Akustik 2

Acoustic hanger with hook and wire clip for suspended ceilings. Also suitable for machinery.
Alt imagen

Akustik 4

Acoustic hanger with female M6 thread for suspended ceilings, piping, and machinery.
Akustik T47 Safety

Akustik T47 Safety

Acoustic hanger with automatic safety clip for 45–47 mm C-channel profiles.
Alt imagen

Akustik Lateral

Acoustic hanger for lateral wall or beam mounting.
Alt imagen

Akustik Super

Reinforced acoustic hanger for T-47 and T-60 ceiling profiles.

VT Type 3 Acoustic Spring Hangers

VT Type 3 Acoustic Spring Hangers

VT Type 3 acoustic spring hangers for fixing to I-sections, designed for low-frequency vibration isolation and loads from 5 to 150 kg per hanger.
Springtec Super T47

Springtec Super T47

An acoustic spring hanger which clips directly to 45-47mm wide ‘C’ channel profiles. Load range 5-60kg
Springtec Super T60

Springtec Super T60

An acoustic spring hanger which clips directly to 60mm wide ‘C’ channel profiles (CD6027 Knauf). Load range 5-60kg
Springtec Lateral

Springtec Lateral

Lateral spring hanger for low-frequency vibration isolation. Load range: 11–132 lb.

Alt imagen

Akustik Tiltfix

Accessory for installing acoustic hangers on sloped ceilings and inclined surfaces.
Akustik T

Akustik T

Acoustic hanger for suspended ceilings. Reduces structure-borne vibration and noise.
Acoustic results

Access all our acoustic results

More Information
Acoustic supports

We can help you

We have a team of engineers ready to assist you with your specific needs.
Contact us
descripcion