Acoustic isolation of lightweight timber structures
Structure-borne noise isolation for lightweight timber buildings
Insulation using Sylodyn:
1. Timber wall: Lightweight structural wall that can transmit structure-borne vibration and noise between adjacent spaces if not acoustically decoupled.
2. Sylodyn® ND: High-performance resilient material designed to acoustically decouple timber structural junctions and reduce the transmission of structure-borne vibration.
3. Sylodyn® NE: Resilient material designed to acoustically decouple structural elements, reducing the transmission of structure-borne vibration in lightweight timber buildings.
4. Timber floor: Lightweight floor system that requires resilient isolation elements to control impact transmission, structure-borne vibration, and airborne sound.
NEW LABORATORY TEST RESULTS FOR LIGHT WOOD STRUCTURES
LABORATORY TEST RESULTS FOR LIGHT WOOD STRUCTURES
In order to show the acoustic advantages when using Akustik+Sylomer® Floor mounts and Akustik + Sylomer® Super T60 acoustic hangers in a light wood construction, an independent external technological center has performed impact and airborne noise tests using different configurations in light wooden structures.
NEW LABORATORY TEST RESULTS FOR THE AKUSTIK + SYLOMER MOUNTS IN DOWEL-LAMINATED TIMBER (DLT) STRUCTURES
SUSPENSION CEILING - LIGHT WOODEN STRUCTURE
We have carried out various tests in certified laboratories to demonstrate the benefits of using acoustic mounts. In these tests, we compare the results of rigidly installed ceilings against suspended ceilings with rubber and Sylomer mounts.
COMPARISON RIGID CEILING WITH SAND/ROCK WOOL VS ELASTIC
Comparative tables of German laboratory ift ROSENHEIM where noise impact and airborne noise of the wooden ceilings with sand and rock wool filling with and without AMC supports are compared.
EFFICIENCY OF THE AKUSTIK + SYLOMER LINES AT LOW FREQUENCIES
Andreas Rabold from IFT Rosenheim carried out an study called “Trittschalldämmung richtig bewerten” to evaluate the correlation between the value of Ln,w according to DIN EN ISO 717-2 and the subjective perception of impact noise on wooden ceilings.
AKUSTIK + SYLOMER MOUNTS IN DOWEL-LAMINATED TIMBER (DLT) STRUCTURES
Different tests have been carried out using different solutions for the floating floor from a naked structure to an installation with several cement board layers with our floating mounts.
AKUSTIK + SYLOMER® CHANNEL CLIPS IN TIMBER JOISTS CEILING
This article shows the laboratory tests results for different suspended ceiling installations in timber joist ceiling structures.
TIMBER JOIST CONSTRUCTION
Demonstration videos comparing the audible noise in a hotel room, with Timber joist structure, which has a very noisy nightclub just above.
ADVANTAGES ON WOODEN STRUCTURES
Akustik+Sylomer® acoustic hangers provide an extraordinary performance on wooden structures.
